* Move service helpers to LifxManager
* Add lifx_set_color
This is a synonym for light.turn_on except it does not actually turn on the
light unless asked to.
Thus, turn_on can be implemented just by asking.
* Rename set_color to set_state
* Support power=False with lifx_set_state
* ps - do not install all dependencies
* Comment out blinkt because it depends on GPIO
* Add pip upgrade check back
* Disable import error blinkt
* Update comment
* Fix comment
The hue is now a float but the hsbk conversion still believed it to be
an integer that could not be larger than 359. The float can in fact be,
for example, 359.9 and this would cause an out-of-bounds error in the
set_color call.
For completeness, the initial hue is also changed to a float.
Recent aiolifx allow sending messages to unregistered devices (as a
no-op). This is handy because bulbs can disappear anytime we yield and
constantly testing for availability is both error-prone and annoying.
So keep the aiolifx device around until a new one registers on the same
mac_addr.
* Added osramlighrify groups.
Allows you to make use of the build in osram lightify groups. Group states get
handeled similar as in the case of phillips hue. A lightify group shows up as
light in the homeassistant webinterface. If one light of the
group is on, the complete group is considered to be on.
To use this feature, first define some groups within your lighrify bridge, then
set add `allow_lightify_groups=true` to you osramlightify config.
It might look like:
````yaml
- platform: osramlightify
host: IP-ADDRES
allow_lightify_groups: true
```
* Fixed Pylint errors.
* Included requests.
* Included more requests.
* Fixed setup bridge and removed _light attribute.
* Update osramlightify.py
Forcing a refresh will log a warning if the periodic async_update happens
to be running already.
So let's do the refresh locally and remove the force_refresh.
State restoration takes up to a second because bulbs can be slow to react.
During this time an effect could keep running, overwriting the state that we
were trying to restore.
Now the effect forgets the light immediately and it thus avoids further
changes while the restored state settles.
This clears the internal cache in case polling picked up the state as set by
an effect.
For example, aborting an effect by selecting a new brightness could keep a
color set by the effect.
This allows for more of a disco mode where lights change so fast that you
actually notice it.
Also change the valid period to the maximum 20 msgs/sec that LIFX bulbs
can handle.
First, move the default away from turn_on so we do not have to test for
the current service.
Next, change the default color away from random. The new default is that
saturated colors will flash white and desatured colors will flash to their
fully satured color. Always with full brightness.
After many experiments, this was the method that best produced results that
are both visually pleasing and always noticeable as a flash.
* light.sensehat: adding plugin to control the 8x8 LED matrix on a Sense Hat
* add new .coveragerc entry
* light.sensehat: formatting and removing unused import
* light.sensehat: add to requirements list
* light.sensehat: update docstrings to the linter's specs
* light.sensehat: add a bit more docstring
* Remove global limit on white light temperature
Here are the supported temperatures of some popular bulbs:
Philips Hue: 2000K-6500K (the current 500-154 mired range)
LIFX Color 1000: 2500K-9000K
IKEA TRÅDFRI: 2200K, 2700K, 4000K
Obviously, Home Assistant cannot enforce a global limit and work properly
with all of these bulbs. So just remove the limit and leave it up to each
platform to work it out.
This commit updates the existing users and adds a clamp to Hue (where the
limit appears to have originated). It does not attempt to update other
platforms that might need extra handling of the larger range that is now
possible.
* Add min_mireds/max_mireds state attributes to lights
* Support min_mireds/max_mireds with LIFX lights
This makes more sense because the input and output brightness is the same.
We currently convert through RGB which does contain a brightness so we supply
an arbitrary value as input and discard the output.
* Default to white when setting LIFX temperature
Changing the temperature of a saturated color is possible but not very
interesting. So assume that a change of the temperature implies setting
the color to white, unless a different color is actually specified.
This makes the frontend temperature picker much more useful because it can
now be used to get away from a colored light.
* Default to a neutral white temperature when setting LIFX colors
This means that setting a particular color will always give the same output,
no matter what the temperature was previously at.
* Find brightness after colors
Now the color_temp logic will not see a changed color when setting
temperature+brightness and thus we will actually get a white light in
this situation.
The XY conversion can then not use brightness as input. This is not
an issue because XY only affects hue and saturation, not brightness. So
we can just use an arbitrary value as brightness input.
* Add a simple comment to a complex conditional
* Add support for Zigbee Home Automation
* Fewer magic numbers
* Make optional device config work
* Remove non-zha device_tracker stuff
* Always return boolean from is_on
* Only pass through JSON serializable discovery_info
* Update to bellows 0.2.4
* Fewer magic numbers in binary sensor
* Populate const structures from a function
* Update bellows to 0.2.6
* Fewer magic numbers in light
* Take all possible clusters when overriding
* Update bellows to 0.2.7
* Added initial support for tradfri group control
* Tried to keep original variable structure
* pylint and pep8 fixes
* Fixed lint error about docstring
* Removed unneeded stuff, renamed _light. Needs to be released pytradfri version.
* Better naming of variables inside add_devices call.
* avion light: Bump python-avion dependency version
The dependencies in python-avion weren't sufficiently strict. This is now
fixed, but means we need to depend on a new version.
* decora light: Bump python-decora dependency
There's a new version of python-decora with a reliability fix, so depend on
that.
* Refactor into find_hsbk
This will be useful for new methods that also have to find passed in colors.
* Add AwaitAioLIFX
This encapsulates the callback and Event that aiolifx needs and thus avoids an
explosion of those when new calls are added.
The refresh_state is now generally useful, so move it into its own method.
* Initial effects support for LIFX
These effects are useful as notifications. They mimic the breathe and pulse
effects from the LIFX HTTP API:
https://api.developer.lifx.com/docs/breathe-effecthttps://api.developer.lifx.com/docs/pulse-effect
However, this implementation runs locally with the LIFX LAN protocol.
* Saturate LIFX no color value
Now the color is "full saturation, no brightness". This avoids a lot of
temporary white when fading from the "no color" value and into a real color.
* Organize LIFX effects in classes
This is to move the setup/restore away from the actual effect, making it quite
simple to add additional effects.
* Stop running LIFX effects on conflicting service calls
Turning the light on/off or starting a new effect will now stop the running
effect.
* Present default LIFX effects as light.turn_on effects
This makes the effects (with default parameters) easily accessible from
the UI.
* Add LIFX colorloop effect
This cycles the HSV colors, so that is added as an internal way to set a
color.
* Move lifx to its own package and split effects into a separate file
* Always show LIFX light name in logs
The name is actually the easiest way to identify a bulb so just using it
as a fallback was a bit odd.
* Compact effect getter
* Always use full brightness for random flash color
This is a stopgap. When a bit more infrastructure is in place, the intention
is to turn the current hue some degrees. This will guarantee a flash color
that is both unlike the current color and unlike white.
* Clear effects concurrently
We have to wait for the bulbs, so let us wait for all of them at once.
* Add lifx_effect_stop
The colorloop effect is most impressive if run on many lights. Testing
this has revealed the need for an easy way to stop effects on all lights
and return to the initial state of each bulb. This new call does just that.
Calling turn_on/turn_off could also stop the effect but that would not
restore the initial state.
* Always calculate the initial effect color
To fade nicely from power off, the breathe effect needs to keep an
unchanging hue. So give up on using a static start color and just find the
correct hue from the target color.
The colorloop effect can start from anything but we use a random color
just to keep things a little interesting during power on.
* Fix lint
* Update .coveragerc
Anders Melchiorsen
Paulus Schoutsen
Fabian Affolter
corneyl
Daniel Høyer Iversen
Robbie Trencheny
deisi
Gergely Imreh
Alok Saboo
Wojciech Bederski
onsmam
Russell Cloran
Ron Klinkien
Matthew Garrett
Martin Hjelmare
Sören Oldag